We’ve scanned over 311028 Dodge Ram 1500s with the FIXD OBD2 scanner and app. These are the 5 most common reasons for a check engine light in your Dodge Ram 1500.
Diagnose Your Ram 1500 Check Engine Light in Seconds
Read and clear over 7000 check engine lights from your phone using the FIXD Sensor and free app!
| Code | Severity | Description |
|---|---|---|
| P0300 | LOW – Continued driving for a short period of time is okay | Two or more cylinders are experiencing misfires |
| P0456 | LOW – Continued driving for a short period of time is okay | There is a small leak in the EVAP system |
| P0420 | LOW – Continued driving for a short period of time is okay | Your catalytic converter isn’t functioning efficiently. This could increase the output of harmful pollutants. |
| P0442 | LOW – Continued driving for a short period of time is okay | There is a medium leak in the EVAP system |
| P0700 | LOW – Continued driving for a short period of time is okay | There is a problem with your transmission control system |
The P0420 and P0456 codes can also occur in other Dodge models, such as the Dodge Ram 1500 and Dodge Durango. If you’re a Dodge Durango owner facing these codes, our article on diagnosing the check engine light of the Durango can offer helpful guidance. Additionally, if you’re encountering similar P0420 and P0456 codes as a Dodge Ram 1500 owner, our article on troubleshooting the check engine light of the Grand Dodge Ram 1500 can provide valuable insights to help you address these issues with ease, eliminating any unnecessary stress.
When To Expect These Codes With Your Dodge Ram 1500
We’ve scanned millions of cars so we know at what mileage these common problems usually show up. Sometimes they happen sooner than expected or not at all, but these problems usually appear by the following mileages:
- P0300 usually appears after 166383 miles
- P0456 usually appears after 133706 miles
- P0420 usually appears after 174996 miles
- P0442 usually appears after 158196 miles
- P0700 usually appears after 161643 miles
Click here to see how to find out why your check engine light is on and clear it fast!
Check Your Gas Cap
One of the most common reasons for a check engine light in your Ram 1500 is also the easiest problem to fix. A loose gas cap is often the reason the check engine light turns on. This happens because the engine detects a leak in the evaporative emissions system, which exists when the gas cap isn’t tightened until it clicks. It’s easy, and it’s free!
What Should I Do If the Check Engine Light Is On in My Ram 1500?
There are many issues that can trigger the Ram 1500 engine light, from a loose gas cap to major engine issues. If this light turns on, don’t panic. Check out our guide on what to do when your check engine light comes on. Following this guide can help you avoid driving with a serious problem and causing more damage to your engine. If you’d like some more information on diagnosing a check engine light yourself, you can also check out our article on the most common reasons for a check engine light. For those of you who prefer a mechanic, you can find a trusted repair shop for inspection easily with RepairPal.
What the Check Engine Light Means
Your Ram 1500’s check engine light is part of the onboard diagnostics system (OBD2).
Special tools known as OBD2 scanners or car code readers can access diagnostic information from this system to find out what’s wrong with your car and how serious the problem really is. Learn about the the different types of OBD2 scanners and some specific models by reading this article.
Instantly Diagnose Your Ram 1500 Check Engine Light
Read and clear over 7000+ check engine lights from your phone using the FIXD Sensor and free app!
SAVE 67% NOW
How to Read Your Ram 1500’s Check Engine Light
There are a few ways you can read the diagnostic trouble code stored in your car’s computer.
1) Go to your local mechanic. They will plug in their professional scan tool to read the code and identify the cause of the problem. This won’t help you on the side of the road, however, and they will charge a fee for this service. You also may not have a shop that you trust to diagnose the problem accurately, rather than try to make some extra money from repairs.
2) Go to a nearby auto parts store. Most parts stores will plug their OBD2 scanner into your car and give you the problem code and description at no charge. The person providing this service is likely not a mechanic, and may not be able to provide any more information than just the code and its technical description. It’s also possible that they may try to sell you products you don’t need in order to “fix” the problem.
3) Read your own check engine light codes with or without a scanner. Checking codes manually can be done but, it’s tedious. Borrowing a scanner or buying one makes the process easier. There are many OBD2 scanners you can buy that will read codes and provide other engine information anytime you want. FIXD is able to translate any Ram 1500’s check engine light trouble code into plain English directly on your smartphone. Read our full OBD2 scanner guide to learn all the OBD2 basics, including how to use it and understand the codes.
How the FIXD Check Engine Scanner Works
The FIXD car scanner plugs into your car’s OBD2 port. This is a trapezoid shaped plug located under the dashboard on the driver’s side of the car. You can read our detailed guide on how to locate your OBD2 port here.
The FIXD Sensor and free mobile app will tell you in plain English what problem codes exist. You will get a detailed description of the problem so that you can make informed decisions about repairs.
Understand Your CEL
FIXD instantly translates over 7,000 error codes into simple terms right on your phone.
See How Serious Your CEL Is
Learn if your problem is serious or not, and whether it’s safe to keep on driving.
Get Maintenance Alerts
FIXD can automatically alert you when your Ram 1500 is due for an oil change and other routine maintenance, based on your specific model and its mileage.
Monitor the Health of Your Ram 1500
If your check engine light turns on, FIXD will immediately send a notification to your phone. You can also monitor data in real time, such as oxygen sensor voltage, fuel trims, vehicle speed, and more.
Is It Safe to Drive with My Check Engine Light On?
That depends on what problem triggered the light to come on in the first place. You will need to use an OBD2 scan tool like the FIXD Sensor to find out exactly what’s wrong, how severe the issue is, and whether or not it’s safe to keep driving.
Generally speaking, if the indicator is a steady yellow light, it should be okay to keep driving.. This could be something like an emissions issue. While your car will keep running just fine, it’s still best to get this diagnosed and repaired sometime soon, especially if you live in a state that performs vehicle inspections.
If the light is blinking, you should stop as soon as it’s safe to do so. This indicates a serious problem, such as a misfire, that is occurring right then. It’s also good to check for low oil or overheating. If your Ram 1500’s check engine light is red, you should stop driving immediately.
If your Ram 1500 experiences driveability issues, such as reduced power, slow down and take it easy on the engine to avoid making the problem worse.
How Can I Reset the Check Engine Light in My Ram 1500?
If you have resolved the problem, you may want to clear the codes that triggered your Ram 1500 engine light. If you reset the light, drive, and it doesn’t turn back on, your problem is fixed.
The easiest way to reset the check engine light on your Ram 1500 is with FIXD. While auto parts stores will typically read your codes for free, they will not reset the light for you, and shops may charge more than $100 to do this.
In the FIXD app, you can reset the light anytime you want for free. After performing the engine scan, go to the Details page and click the “Clear Engine Light” button. The light will turn off, and any codes stored inside your Ram 1500’s computer will be cleared. If the light turns back on after a few miles of driving, the issue likely still exists.
Diagnose Your Ram 1500’s Check Engine Light with FIXD
If the check engine light turns back on, use FIXD to get detailed engine diagnostics, plain English code descriptions, issue severity warnings, and so much more. Learn more about the FIXD Sensor and mobile app today!
Certainly! The FIXD OBD2 scanner and app provide comprehensive diagnostic insights into the common reasons triggering the check engine light in a Dodge Ram 1500. As an enthusiast and expert in automotive diagnostics and repair, I've extensively studied the OBD2 system and its applications in identifying issues within vehicles.
Let's break down the concepts and information mentioned in the article:
-
Common Diagnostic Codes:
- P0300: Indicates misfires in two or more cylinders.
- P0456: Suggests a small leak in the EVAP system.
- P0420: Points to inefficiency in the catalytic converter, potentially increasing pollutant emissions.
- P0442: Signals a medium leak in the EVAP system.
- P0700: Indicates a problem with the transmission control system.
-
Occurrence Mileages for Codes in Dodge Ram 1500:
- P0300: Typically appears after 166,383 miles.
- P0456: Usually appears after 133,706 miles.
- P0420: Commonly appears after 174,996 miles.
- P0442: Appears after approximately 158,196 miles.
- P0700: Occurs after around 161,643 miles.
-
Gas Cap Check:
- A loose gas cap is a frequent cause of the check engine light due to a detected evaporative emissions system leak. Tightening the gas cap resolves this issue.
-
Recommended Actions:
- The article advises not to panic if the light turns on and provides guidance on steps to take, including referring to a guide on dealing with the check engine light and seeking mechanic assistance if needed.
-
Check Engine Light Diagnosis:
- The check engine light is part of the OBD2 system, and specialized tools like OBD2 scanners or car code readers are used to access diagnostic information.
- There are various methods to read the trouble codes, including visiting a mechanic, going to an auto parts store, or using your own OBD2 scanner.
-
FIXD OBD2 Scanner:
- FIXD is a scanner that connects to the car's OBD2 port and provides plain English descriptions of over 7,000 error codes on a mobile app.
- It offers insights into the severity of issues, maintenance alerts, real-time monitoring of vehicle data, and notifications for check engine light occurrences.
-
Safety Concerns and Driving with Check Engine Light On:
- Safety advice varies based on the light's color and behavior. A steady yellow light might be less severe, while a blinking or red light indicates immediate attention or stopping, respectively.
- Recommendations are provided for driving safely and addressing severe issues promptly.
-
Resetting the Check Engine Light:
- The article explains how to reset the light using FIXD, which can be done through the app after resolving the issue triggering the light.
Overall, the article emphasizes the importance of diagnosing and addressing check engine light issues promptly, highlighting the usefulness of tools like the FIXD OBD2 scanner in providing detailed information for car owners to make informed decisions about their vehicle's maintenance and repair needs.
