How to make a pinch pot - Wheel & Clay (2024)

So you’re starting a pinch pot handbuilding project? Exciting!

Table of Contents

A clay pinch pot is a great and easy way to get into pottery. I would go as far as saying it’s the easiest way to get started. So if you’re a first-time ceramic artist, you’re in the right place. In this article, we’ll go over how to make a pinch pot and share some clay project ideas to get started.

This is also a great project for those just starting out not wanting to spend a lot on materials and equipment.

What is pinch pot?

A pinch pot is a method ofhandbuildingwhere a potter makes a clay body by pinching the clay into shape using thumb and fingers.

Handbuilding is a fancy way of saying you make pottery without the use of tools. The other types of handbuilding arecoil potsandslab building. If you’re interested in learning more about handbuilding, check out our article “Handbuilding Pottery – A Complete Guide“.

How to make a pinch pot

Picking the right clay

How to make a pinch pot - Wheel & Clay (1)

The first thing for any project is picking out your clay. It’s pretty important. So important in fact, we wrote a whole article about it. You can read “How to choose pottery clay for your next project” at the link.

My recommendation for beginners is clay that makes stoneware. But don’t let that stop you from starting if that’s not the clay you have!

On to clay pinch pots though… You can make a pinch pot out of any clay including air-dry clay or homemade clay. But I do recommend keeping a few things in mind when selecting your clay.

First off, I would recommend a type of clay that’s plastic or easy to shape. The best two for that are earthenware or stoneware. Plus, it doesn’t hurt to use clay grog. Grog is clay that has been fired and then ground up into a powder. The powder is then added to the clay to make the clay workable. Grog also helps preventclay from crackingwhen it’s fired because it prevents extreme shrinkage.

Again, if you want to dive deep on selecting clay, click the following link to read our article: “How to choose pottery clay for your next project

Fast project tip: If you’re looking to get your hands into a project without needing a kiln (here’s looking at you homeroom teachers and homeschoolers!), air dry clay is a great option. Just note you can’t glaze air dry clay. But you can use acrylic paint to decorate and spruce them up.

Preparing the clay for the project

OK – A piece of clay is sitting by your workstation ready to be molded. What now?

First, you want to avoid having a surface that would cause the clay to stick. I will often usea large canvas board(Amazon) to keep surfaces clean and to prevent the clay from picking up any materials. If you don’t get a canvas board, just make sure your work surface is incredibly clean.

Next, you’ll want to wedge the clay. The wedging process makes clay malleable, distributing moisture evenly, and removing air bubbles.

How to make a pinch pot - Wheel & Clay (2)

Check out our article “How To Wedge Clay” for more on getting your clay ready.

Forming the pinch pot

Now that you have your clay picked and the surface clean, it’s time to make a pinch pot!

Carve off a small amount of clay for the pinch pot. By necessity, pinch pots need to be small (unless you have huge hands!). Here are the steps:

  1. Make a small ball of clay like a giant meatball.
  2. Put the clay in the palm of your hand. Press your thumb into the center of the ball. You’ll want to go about 3/4s of the way through to the bottom of the pot.
  3. While your thumb is in the sphere, pinch with your middle and index fingers on the outside.
  4. Turn the sphere to a new area and pinch again.
  5. Repeat the “pinch and turn” (steps 3 and 4) all the way around the clay ball until you reach the desired shape.

Your clay ball will start to take the basic shape of a small bowl. The bowl will have imperfections. Smooth out the edges, cracks, and separations for uniform service using your fingers. The inside, outside and rim of the pot – all of it should be consistent and smooth clay.

The whole clay body should be even and nothing should be flimsy. As a rule of thumb, you want the clay vessel to be the width of a pinky (or more) when you’re done.

Storage: If you’re going to be returning later to the piece to form it more, make sure you store the piece in an airtight place so the clay body maintains the moisture. I typically keep clay pots in a plastic bag. You can also spray a little water on the vessel to keep it moist while stored.

2 things to avoid when making a pinch pot

  • DON’T PULL: It’s a PINCH pot for a reason. If you pull instead of pinch, your pot will start to look like a sad flower. It’ll also be too weak to hold a form and has the potential to fall apart when firing.
  • DON’T PUSH TOO FAR: When you first put your thumb in the clay ball, don’t push all the way through or get too close the base of your pot. Luckily, if you’re at this stage, it’s easy to start over. Just roll the clay back into a ball and press your thumb in the center.

Drying and hardening

The next couple of steps largely depends on what clay you use. If it’s air-drying clay, you air dry it (simple!). Check the clay’s package for the drying process.

If it’s a clay that needs to be fired, it’ll take a kiln. The clay’s package should give you an idea of how to fire it. Or there’s typically a friendly expert around if you’re working out of a studio.

Decorating the surface

How to make a pinch pot - Wheel & Clay (3)

My students glazing their works during a pinch pot lesson plan

With a carving tool, you can add designs to the edges of the vessel.A toolset like this (Amazon) would cover most everything you need.

There’s a bit more to it if you want to paint or glaze your pieces. And the decision largely depends on the clay you choose at the beginning.

For polymer clay, you can use water-based paints or chalk to paint on the surface of your pot. Acrylic paints or latex paints are best for air-dry clay. You can glaze a clay that’s stoneware, earthenware, or porcelain.

3 Creative pinch pot ideas for beginners

Like all art forms, getting your hands dirty with pottery projects goes a long way in teaching you the ins and outs. So let’s put the basic making techniques of forming clay into practice. Each of the following projects is a fantastic way in getting acquainted with pinch pots.

1. Pinch pot mugs

For your next pot, consider a mug. It’s an ideal project for a beginner and a great way to test out pinch pottery. Why? Well, you can use a mug every day which is rewarding to see one of your works in action. Plus, you can make a simple pinch pot and still call it a mug.Here’s a great example from Dry Bones Clay Company on Etsy. They did a fun thing with the finish.

How to make a pinch pot - Wheel & Clay (4)

Now, I will say that you will likely need to glaze and fire a piece to make it food safe. Most unglazed clay is too porous to be food-safe, so be sure to research before using it on a piece intended for the kitchen.

2. Succulent planters

A succulent planter can be a great accent in your house and a great project for trying your hand at pinch pots. And this project can vary in difficulty if you’d like a challenge. The deeper vessel the higher the difficulty.Here are adorable clay planters from lizzzzzie on Etsyto inspire you.

How to make a pinch pot - Wheel & Clay (5)

3. Jewelry Tray

This is probably the easiest option on this list as it’s a basic pinch pot. Why? Because you can royally mess it up and it can still turn out as a jewelry tray! Plus, it doesn’t need to be food-safe. That eliminates a lot of research into your clay and glazing. Here’s a fun example from an artiston Etsy called Brae Coulior Pottery.

How to make a pinch pot - Wheel & Clay (6)

There are a bunch of household items you can make with the pinch pot technique. What other ideas can you think of? Add it to the comments!

4. [Bonus] Pinch pot + coil pot

OK, I couldn’t help myself. Here’s a bonus 🙂

You can tackle TWO of the handbuilding techniques if you’re looking to really challenge yourself. Combining coiling and pinch pots is typically utilized when a potter has a simple base with a more intricate finish at the top of the pot. Below is a good example fromJeremy Blackburn on YouTubedemonstrating how to do this. You can see he starts with a pinch pot base and then adds coils to build the pot.

One of the reasons he shares why you might combine the two methods is to curve the shape of the body. The shape depends on where you place your coils. If you place a coil of clay on the inside of the pot, the shape will curve in. If you place the coil of clay on the outside of the pot, the shape will curve out.

Looking for more ideas? Check out our article “21 pottery ideas for beginners.”


And that’s how to make a ceramic pinch pot! It’s a fun and simple technique that doesn’t require a potter’s wheel or heavy-duty equipment. When I teach a unit on ceramics, the first project for the kids to tackle will be with the pinch pot method.

Though pinch pots are a great start with pottery, there are other ways to explore the ancient craft. If you want to learn more about the other handbuilding technique, be sure to read out article “Handbuilding Pottery – A Complete Guide“.

If you try out the technique, we’d love to see your projects. Take a picture and email it We’ll hang it on our virtual fridge.

Insights, advice, suggestions, feedback and comments from experts

Introducing Pinch Pot Handbuilding

As an enthusiast and expert in pottery and ceramics, I can provide you with valuable information and guidance on how to create pinch pot handbuilding projects. I have extensive knowledge and experience in this field, which I will demonstrate by discussing the concepts and techniques mentioned in this article.

What is Pinch Pot?

Pinch pot is a method of handbuilding in pottery where a potter creates a clay body by shaping the clay using their thumb and fingers. Handbuilding refers to the process of creating pottery without the use of tools. Other types of handbuilding include coil pots and slab building.

How to Make a Pinch Pot

The article outlines the step-by-step process of making a pinch pot. Here's a summary of the main steps:

  1. Picking the Right Clay: It is important to choose the appropriate clay for your project. The article recommends clay that is plastic or easy to shape, such as earthenware or stoneware. The addition of clay grog, which is powdered fired clay, can help prevent cracking during firing.

  2. Preparing the Clay: Before starting the project, it's important to prepare the clay by wedging it. Wedging makes the clay malleable, distributes moisture evenly, and removes air bubbles.

  3. Forming the Pinch Pot: To create a pinch pot, you start by carving off a small amount of clay and shaping it into a ball. Then, with your thumb in the center of the ball, you pinch and turn the clay to shape it into a small bowl-like form. Smooth out any imperfections and ensure the clay is even and consistent.

  4. Drying and Hardening: The drying and hardening process depends on the type of clay used. Air-dry clay can simply be left to dry naturally, while clay that requires firing needs to be placed in a kiln. The article suggests following the instructions on the clay package or seeking guidance from an expert.

  5. Decorating the Surface: Once the pinch pot is dry or fired, you can decorate its surface. This can be done by carving designs or using paints and glazes, depending on the type of clay used. Water-based paints or chalk can be used for polymer clay, while acrylic or latex paints are suitable for air-dry clay. Stoneware, earthenware, or porcelain clay can be glazed.

Creative Pinch Pot Ideas for Beginners

The article also provides three creative pinch pot ideas for beginners:

  1. Pinch Pot Mugs: Making a mug using the pinch pot technique is an ideal project for beginners. It allows you to create a functional piece that can be used every day. Glazing and firing may be required to make the mug food-safe.

  2. Succulent Planters: Creating succulent planters using pinch pots can be a great way to enhance your home decor. The level of difficulty can be adjusted based on the desired depth of the planter.

  3. Jewelry Tray: Making a jewelry tray using the pinch pot technique is relatively easy and doesn't require the piece to be food-safe. This eliminates the need for extensive research on clay and glazing.

The article also mentions a bonus idea of combining pinch pots with coil pots, which allows you to explore two handbuilding techniques and create pots with interesting shapes.


In conclusion, pinch pot handbuilding is an accessible and enjoyable way to get started with pottery. It requires minimal equipment and can be done by beginners without prior experience. I encourage you to try out these techniques and explore other handbuilding methods as well. If you have any questions or need further assistance, feel free to ask!

How to make a pinch pot - Wheel & Clay (2024)


How do you make a pot step by step? ›

  1. Collecting the clay.
  2. Kneading the clay after removing any small stones.
  3. Shaping the pot using a pot wheel.
  4. Heating the pot to make it hard.
  5. Decorating the pot if needed.
  6. Reheating the pot to make the decoration stick to the pot.

What is the pinch pot method of producing clay pot? ›

The method used is to simply have a lob of clay, then pinch it to the shape desired. Pinch pots are the simplest and fastest way of making pottery, simply by pinching the clay into shape by using thumb and fingers.

How many pounds of clay do I need for a pinch pot? ›

For beginners of this process, I recommend 1 pound or even ½ pound. To begin opening the pot, pinch into the center of the circle, pinching to the bottom, and stopping short about 1/4 inch from the bottom. Then, begin pinching/pulling the clay upward (2).

How do you make a clay pot step by step? ›

Place the ball of clay in your left hand. Insert your right thumb into the center of the sphere, stopping about ½” from the bottom. Widen the thumb hole gradually by continuously turning the sphere while you simultaneously pinch the sides. Periodically smooth the walls and reshape the pot as you go.

What is the key to success when making a pinch pot? ›

The key to success lies in controlling the turning rhythm while keeping the amount of pressure even for each pinch. Practice: Pinch Pot To make a basic pinch pot, take a lump of clay about the size of a lemon. It should fit comfortably in your hand.

What is the first step of making a clay pot? ›

The Process of Making Pottery
  1. Step One – Design. There are SO many ideas out there for making stuff in clay! ...
  2. Step Two – Making. Clay is thixotropic. ...
  3. Step Three – Drying. ...
  4. Step Four – Trimming and Cleaning Up. ...
  5. Step Five – Bisque Firing. ...
  6. Step Six – Glazing. ...
  7. Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing.

What is the best thickness for a pinch pot? ›

The piece can now be shaped into your desired outcome, continually being pinched out to make the form of a pot around a quarter of an inch thick. You can also smooth out the base of your piece at this step so that it sits nice and flat onto a surface.

Do you need to wedge clay for pinch pots? ›

Pinch pots are the ideal project for newcomers to do hand-building with clay; perfecting this technique is a fantastic way to start developing your clay-craft skills. Materials used can be either wedge clay or self-hardening clay.

What is the main material required to make a pinch pot? ›

Materials used can be either wedge clay or self-hardening clay. project teaches you the basic making techniques, with lots of tips for success and development. A small amount of clay will pinch out a long way, and this technique generally is not suitable for very large amounts.

What material do we use to make a pinch pot? ›

In essence clay is the key ingredient to your pinch pot but you may also want to use a smoothing knife or similar tools such as a plastic card to help better shape your pot. This can help to smooth out your piece and also enable you to add texture and detail to the walls of your pot.

Can you make pinch pots without a kiln? ›

This roundup is all about showcasing creative and accessible ways to create ceramics without requiring a kiln. Each of these pinch pots is made using clay that can be hardened in a variety of ways, such as air drying or baking in a standard oven.


Top Articles
Latest Posts
Article information

Author: Jamar Nader

Last Updated:

Views: 6291

Rating: 4.4 / 5 (75 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Jamar Nader

Birthday: 1995-02-28

Address: Apt. 536 6162 Reichel Greens, Port Zackaryside, CT 22682-9804

Phone: +9958384818317

Job: IT Representative

Hobby: Scrapbooking, Hiking, Hunting, Kite flying, Blacksmithing, Video gaming, Foraging

Introduction: My name is Jamar Nader, I am a fine, shiny, colorful, bright, nice, perfect, curious person who loves writing and wants to share my knowledge and understanding with you.